XDeep Stealth 2.0 Classic Wing with Redundant Bladder


XDeep Stealth 2.0 Classic Wing with redundant bladder

This product is the wing module only (no Harness, Central Weight Pocket (CWP) or Bungee).

The Stealth 2.0 Classic Sidemount Wing is a modular wing that is attached to the diver using chest, waist and crotch bungees. There are four connection points on each side and a lower connecting point for the crotch bungee, which comes between the legs and be looped over the waist bungee – keeping the wing snug against the diver.  Anatomically designed to sit super flat in the small of the diver’s back, it remains streamlined and and comfortable no matter how full it is.  The dump valve is centrally located in a protected position at the bottom of the wing – this is in the perfect location when diving in a horizontal trim position. The pull cord can be easily reached with either hand.

In this model the wing contains a second, redundant bladder and inflator system with wetsuit divers in mind.

The Stealth 2.0 Classic wing can be added to a harness and CWP for a complete system. It has also been used in addition to a complete Stealth 2.0 system as a second wing for either redundancy or greater lift.

The Classic wing includes:

  • 1 x 16L Stealth 2.0 Classic BCD / Wing with redundant bladder
  • 2 x full inflator systems (note, inflator LP hose is not included so you will need to purchase two of the desired length separately)
  • 1 x Over Pressure Relief Valve (OPRV) that can be accessed by either the left or the right hand

The Stealth 2.0 wing / buoyancy compensator has a double-layer construction with a tough outer shell, made of very strong Cordura© 1100 dTEX. This withstands scratches and abrasions while protecting the inner bladder.

The XDeep Stealth is also available with Tec and Rec wings. This product information video compares the three wing sizes for the XDeep Stealth:


There are no reviews yet.

Be the first to review “XDeep Stealth 2.0 Classic Wing with Redundant Bladder”

Your email address will not be published. Required fields are marked *