Stealth 2.0 TEC Redundant Bladder - Full Set

Description

XDeep Stealth 2.0 Tec Redundant Bladder Full Set

The XDeep Stealth 2.0 sidemount system introduced a revolutionary new sidemount system design, perfect for all occasions from exploratory cave diving to single sidemount recreational diving. The revolution continues with the addition of the Stealth 2.0 “Tec wing” for greater lift.

Here’s what you get in a Stealth 2.0 Tec configuration, full set:

Buoyancy Compensator / Tec RB Wing. The new, high capacity 19L wing is designed for divers needing extra lift; such as when diving with several different mixed gases. The Tec wing also has the great streamlining and easy-to-trim characteristics of the “classic wing” and offers divers a semi-fixed wing solution.

Redundant Bladder. Each wing design contains two fully functional bladders within the one streamlined wing shell. Without compromise, the redundant bladder features a fully operational power inflator and full sized over-pressure release / dump valve (positioned slightly to the right of the primary). The inflator connects to the edge of the wing where the join is both protected and not in an uncomfortable position for the diver.

The Stealth 2.0 Tec RB setup is 3.4kg (this weight includes the full harness and central weight pocket).

The top of the wing connects to the shoulder straps, while the bottom is fixed to the crotch strap and each side is connected to specially designed tri-glides either side of the waist band buckle. The bolt snaps connecting either side of the wing can be left in place or unclipped to allow easy access to the CWP. A Velcro strap around the CWP holds the wing close to your weights and body. The new Stealth 2.0 Tec wing is made using the most durable and high quality materials. It has a double layer construction with the outer shell made of Cordura 1100 dTEX, which resists abrasion and provides the highest level of safety for cave and wreck diving. The inner bladder is also made from a tough nylon fabric.

Stealth 2.0 Harness. The harness comprises of upper and lower nodes, a back section and webbing, allowing the configuration to be adjusted to your exact needs. The back section, shoulder straps, waist belt and crotch strap can each be adjusted independently to ensure a perfect fit and greater comfort. The harness offers freedom of movement that you just don’t get in a backmount system or any sidemount system using a back plate. The harness has a stainlees steel buckle, D-rings and rear ‘square rings’ for mounting cylinders. The harness can also be fitted with an optional butt plate.

Central Weight Pocket (CWP). Correct weight distribution is essential for perfect trim and this can change as you change configuration (e.g. between drysuit and wetsuit, or steel and aluminium tanks, etc). The CWP solves the problem completely, it sits centrally on your spine and enables you to place the weight high or low in the CWP with the individual holding pockets, and the position of the CWP on the harness can also be adjusted.

You can purchase your Tec Set with your preferred CWP size – see the details below.

Note that you can also increase weight using trim pockets (available separately). This weight system used by STEALTH 2.0 is capable of being tailored to any use and any diver.

Your existing harness can fit anyone of the wings, please let us know if you require more information.

Stealth 2.0 complete sidemount system.  The full Stealth 2.0 system comprises three main parts, the harness, CWP and wing.  Details of each are included below.

Stealth 2.0 harness:

  • 1 x Webbing harness with independently moving upper an lower nodes
  • 5 x adjusting plates
  • 2 x bent D-rings (heavy duty)
  • 2 x straight D-rings (heavy duty)
  • 2 x serrated tri-glides
  • 7 x smooth tri-glides
  • 2 x square rear mounting points for cylinders
  • 2 x rubber o-rings (on waist band)
  • 1 x central weight pocket mounting bracket (for position adjustment)
  • 5 x rubber webbing keepers
  • 1 x heavy duty stainess steel waist band buckle
  • 10m bungee chord length (to set up loops for the cylinders)
  • Canister light holder and bungee
  • Stealth 2.0 Central Weight Pocket, select your size:
  • Small – 3kg (2 x 1.5kg) – Short Pocket
  • Medium – 6kg (4 x 1.5kg) – Standard Pocket
  • Wide -10kg (4 x 2.5kg) -Wider Pocket
  • Double – 12kg (8 x 1.5kg) – Double Depth Pocket

Stealth 2.0 Tec RB wing / buoyancy compensator:

  • 1 x Stealth 2.0 wing (with 2 x internal bladders)
  • 2 x full inflator system
  • 2 x dump valve / Over Pressure Relief Valve, may be fitted in the lower position (accessible with either hand) or on the opposite side to the inflator
  • attaching hardware

All Stealth 2.0 systems feature exceptional design and quality, and are CE certified. For detailed information and configuration instructions download a copy of the Stealth 2.0 Tec Manual.

Additional information

Pocket Size

, , ,

Reviews

There are no reviews yet.

Be the first to review “Stealth 2.0 TEC Redundant Bladder – Full Set”

Your email address will not be published. Required fields are marked *